Q:

What are RA and RZ surface finishes?

A:

Quick Answer

When measuring the roughness of a machined surface, RA is the arithmetic average roughness which calculates the average deviation from a mean line, and RZ is is the mean roughness depth, which averages the distance from the highest peak to the lowest valley over a given interval. RA is the most common measurement for machined surfaces.

Know More

Full Answer

The different measurements for machined surfaces help universalize roughness measurements across industries. RA is the most common measurement and allows for quick accepting or rejecting of surfaces. More advanced measurements, such as RZ, allow for different measurements of specific criteria that are important for some industries but maybe not others.

Learn more about Building Materials
Sources:

Related Questions

  • Q:

    How do you sand down concrete?

    A:

    To sand down concrete, remove any coating, seal the cracks and joints with an epoxy filler, attach metal-bonded diamond discs to a grinder, and sand the surface of the concrete. Start with a 30- or 40-grit diamond disc, and slowly increase the grit until you reach the desired finish.

    Full Answer >
    Filed Under:
  • Q:

    How do you put ceramic tile on a tabletop?

    A:

    To affix ceramic tiles to a tabletop, use a trowel to apply commercially available mortar or tile adhesive to the tile backs, then press firmly onto the surface of the table. Maintain a 1/4-inch space between each tile for grouting material. When tiling the table, DoItYourself recommends beginning in the center and working outward.

    Full Answer >
    Filed Under:
  • Q:

    What are granite countertop cleaning tips?

    A:

    Feeling a granite countertop to identify where it needs to be cleaned and using a pH-balanced cleaner minimize the impact that cleaning has on the surface. While granite makes a beautiful countertop, but it is difficult to maintain; using traditional cleansers can cause excess wear and tear.

    Full Answer >
    Filed Under:
  • Q:

    How do you color concrete?

    A:

    Color existing concrete by cleaning the surface, applying a transparent stain. After 4 hours, inspect the concrete to determine if you need a second coat and applying it. After applying the sealer, allow sufficient time for the sealer to cure before allowing traffic on the surface.

    Full Answer >
    Filed Under:

Explore