Q:

How do I redo my Formica countertops?

A:

To redo Formica counters by staining them, mask and sand the Formica, apply primer, stain the Formica, and seal it. The supplies you need for this overnight project are gloves, masking tape, drop cloths, rubbing alcohol, rags, stain, hardener, primer, a paint roller, sponges and sealant.

  1. Mask and sand the Formica

    Mask the perimeter of the Formica with masking tape, and spread drop cloths over the floor and nearby surfaces. Sand the Formica with 220-grit sandpaper, and then wipe it with a rag soaked in rubbing alcohol.

  2. Apply primer

    Put on rubber gloves, cover the Formica with primer, and let it dry for one hour. Apply a second coat, and give it 45 minutes to dry.

  3. Stain the Formica

    Read the instructions on the epoxy stain container. Combine the stain and hardener accordingly. Apply the stain with a sponge, working from one end of the counter to the opposite end. Let the stain dry for an hour, and then sponge on a second coat.

  4. Apply food-safe sealant

    Apply one coat of clear food-safe sealant, and let it cure overnight. The following morning, test an inconspicuous area to verify that the sealant is dry, and then peel away the masking tape.

Learn More

Related Questions

  • Q:

    Can you put ceramic tile over Formica?

    A:

    Formica, a plastic laminate used for decorative purposes, can be tiled over with ceramic tiles. The process of doing so requires that the Formica surface be prepared beforehand to accept the thin-set adhesive used for the ceramic layer before the tiling can begin.

    Full Answer >
    Filed Under:
  • Q:

    How do you install a Formica bathroom vanity?

    A:

    Installing a Formica bathroom vanity can be completed within 2 hours. The job requires a cordless drill, a jig saw, a belt sander, drill bits, adhesive caulk and deck screws. An appropriate hole must be cut before the unit is inserted and secured into place./

    Full Answer >

    Filed Under:
  • Q:

    What are some tips for installing laminate countertops?

    A:

    Some tips for installing laminate countertops include asking the laminate cutter to double check the fittings of the seams to ensure the cabinets are level and asking a friend to help with the installation process. Additionally, use shims to level out any low spots under the laminate to further ensure a level surface, and caulk the area between the countertop and the backsplash.

    Full Answer >
    Filed Under:
  • Q:

    Can you paint marble countertops?

    A:

    According to DoItYourself.com, marble countertops can safely be painted for a nice re-finished appearance. While marble countertops often start as shiny, they can lose some of their brilliance to wear and tear over time and may require re-finishing.

    Full Answer >
    Filed Under:

Explore