Q:

How do you remove bleach from carpet?

A:

To remove bleach from carpet, create a cleaning solution, blot it into the carpet, rinse it and absorb the moisture. The process may need to be repeated until the bleach is removed according to Stainmaster Carpet manufacturers.

Step 1: Make a cleaning solution

Use either 1/4 cup of mild dish soap and 1 cup of warm water or 2 tablespoons of white vinegar and 4 cups of warm water to make the solution.

Step 2: Apply the solution

Start around the outside of the spill and apply the solution until reaching the center. Be sure to blot instead of rub. Let the solution sit for at least 5 minutes.

Step 3: Rinse and repeat

Use cold water to rinse the area. If the bleach remains, repeat steps 1 and 2 until it is gone.

Step 4: Absorb moisture

Place a white towel on the spot to remove any remaining moisture. Let it sit overnight with something heavy on top.

Sources:

  1. stainmaster.com

Is this answer helpful?

Similar Questions

  • Q:

    How do you remove Mop and Glo?

    A:

    You can remove Mop and Glo buildup off your sealed hardwood floor by applying a commercial-grade floor stripper purchased from a home improvement store. To remove Mop and Glo from other types of flooring, such as tile or laminate, use a solution of 1/4 cup of all-purpose cleaner, 1 cup of ammonia and half a gallon of warm water.

    Full Answer >
    Filed Under:
  • Q:

    How can you remove polyurethane?

    A:

    Polyurethane breaks down after some time and requires you to refinish your wooden floors. One of the most important steps in the refinishing process is effectively removing the old layer of polyurethane. Avoid the possible hassles of removing polyurethane and protect yourself as well as your floors with these steps. This task requires polyurethane stripper, rubber gloves, safety goggles, a fan, a scraper, a sander and a paintbrush.

    Full Answer >
    Filed Under:
  • Q:

    How do you remove adhesive?

    A:

    To remove adhesive, saturate the adhesive with baby oil, and rub it off with a plastic scouring pad. Finish up by washing the baby oil off with soap, water and a soft cloth, and buffing the surface dry.

    Full Answer >
    Filed Under:
  • Q:

    How do you remove Wite-Out from plastic?

    A:

    Wite-Out may be removed from plastic by using a combination of WD-40, mild dish soap, a scouring cloth and paper towels. Start by spraying WD-40 over the Wite-Out and allow it to sit for a few minutes to soak into the stain.

    Full Answer >
    Filed Under:

Explore