Q:

How do I remove color that bled into fabric?

A:

Quick Answer

To remove color that bled into fabric, soak the fabric in diluted color-safe bleach, apply a commercial dye lifter and launder the fabric according to the instructions on its care label. This 8-hour procedure requires a bucket, warm water, color-safe bleach, commercial dye lifter, laundry detergent and access to a washing machine.

Know More

Full Answer

  1. Test the fabric

    Put several drops of color-safe bleach on an inconspicuous part of the fabric, and leave it there for two hours. If the bleach does not change the textile's color, it is safe to use on the entire piece of fabric.

  2. Immerse the fabric in diluted bleach

    Fill a large bucket with equal amounts of hot water and color-safe bleach. Submerge the fabric in this solution, and leave it there for three hours. If you do not see substantial improvement in three hours, leave the fabric in the bleach for another hour.

  3. Apply commercial dye remover

    Lift the fabric out of the bleach solution, and rinse it in warm water. If some unwanted color remains, treat the fabric with a commercial dye lifter. Follow the directions on the package.

  4. Launder and dry the fabric

    Launder and dry the fabric according to the directions on its care label. Wash it alone or with similarly colored textiles.

Learn More

Related Questions

  • Q:

    How do you remove ChapStick stains from clothes?

    A:

    Removing ChapStick stains from clothing involves scraping away any excess lip balm remaining on the cloth, treating the fabric with a prewash stain remover and washing as usual. Avoiding machine drying the garment until the stain is gone prevents heat setting the stain. If the stain remains after air drying, repeat the prewash treatment and wash cycle until it is gone.

    Full Answer >
    Filed Under:
  • Q:

    How do you remove petrol from fabric?

    A:

    Removing petrol from fabric is a process that can take up to an hour to complete, in addition to regular washing time. To complete the job, you need a clean cloth, water, a washing machine, baking soda, a stain removing stick and dish soap.

    Full Answer >
    Filed Under:
  • Q:

    How do I remove iron-on hemming tape?

    A:

    To remove iron-on hemming tape, place a scrap piece of fabric over the hemming tape and apply a heated clothes iron to the fabric for several seconds, and then remove the scrap fabric away quickly. This will pull any residue off the item that was originally hemmed, but you may have to repeat the process several times to fully remove the hemming tape.

    Full Answer >
    Filed Under:
  • Q:

    How do you remove grease stains?

    A:

    Remove grease stains from fabric by saturating the stain with a solvent-based laundry pretreatment product and washing the garment with heavy-duty laundry detergent in the hottest water recommended for the fabric. Inspect the garment when it comes out of the washer, and repeat the process if necessary.

    Full Answer >
    Filed Under:

Explore