Q:

How do I remove floor wax?

A:

Quick Answer

Removing old floor wax is a process that can be completed in a variable amount of time depending on the amount of wax and the severity of the build-up. In order to remove floor wax from your floors, use ammonia. You will need a bottle of ammonia, laundry detergent, warm water, a bucket, a mop and steel wool.

Know More
How do I remove floor wax?
Credit: Steve Shepard E+ Getty Images

Full Answer

  1. Create the cleaning mixture

    Take your bucket and add 1/2 cup of ammonia. Pour in a cup of laundry detergent and a full gallon of water. Give this cleaning solution some time to mix before continuing.

  2. Apply the mixture to the floor

    Wet your mop with the cleaning solution in the bucket. Apply it to the floor. Wait several minutes so that the mixture soaks into the wax and begins to soften it.

  3. Scrub the wax

    Scrub the wax vigorously with the steel wool pad. You should be able to remove the wax by applying pressure with the pad. If your pad becomes too clogged with wax, rinse it off in the cleaning mixture.

  4. Rinse

    Empty your bucket and fill it with water. Using your mop once more, quickly rinse down the floor. Make sure you cover all of the areas that were covered with wax.

Learn More

Related Questions

  • Q:

    How should you clean travertine tile floors?

    A:

    Clean travertine tile floors by sweeping up dirt and other debris before using a non-abrasive, neutral cleaner to mop the floor. After mopping, dry the tile with a soft cloth. Gather a broom, a mop, a bucket, cleaner and warm water before beginning this process.

    Full Answer >
    Filed Under:
  • Q:

    What is a natural way to clean and polish sealed hardwood floors?

    A:

    To naturally clean and polish a hardwood floor, sweep the floor, apply a mixture of vinegar, olive oil and lemon oil, mop the floor, and towel-dry. This one-hour process requires cleaning gloves, a spray bottle, vinegar, olive and lemon oils, a mop handle, two sponge mop heads and a towel.

    Full Answer >
    Filed Under:
  • Q:

    How do you tile a floor?

    A:

    Tile a floor by preparing the surface, applying mastic to the backer board, placing and cutting the tile, applying grout and adding sealer. The amount of time needed varies, and you need backer board, self-leveling cement, screws, tiles, a grout sponge, spacers, mastic, a trowel, grout, sealer and a wet saw.

    Full Answer >
    Filed Under:
  • Q:

    How can you tell if a hot water heater is broken?

    A:

    A common sign of a broken water heater is spotting a pool of water on the floor near the tank. Leaking can occur in tanks that are more than six years old. There are several other telltale signs that a water heater needs repair or replacement.

    Full Answer >
    Filed Under:

Explore