To remove limescale from a toilet, turn off the main water valve behind the toilet, remove the water, and pour vinegar and baking soda into the toilet bowl. After a few minutes, scrub the bowl using a toilet scrubber with nylon bristles.Know More
Find the main water valve located on the water line between the toilet and the wall. Turn the water off by turning the valve clockwise.
Use a plastic cup to remove as much water as you can from the bowl. Put the toilet seat and cover up.
Pour 1 cup of white vinegar and 1/2 cup of baking soda into the toilet bowl. The consistency of the resulting paste should be thin. Wait at least 15 minutes for the bubbles to disappear.
Scrub the limescale stains off the bowl with a nylon toilet scrubber. Push the end of the scrubber into the bowl, then swirl the vinegar and baking soda solution around. Wait a few minutes, then pour another 1/2 cup of vinegar into the bowl. Scrub the bowl again.
Turn the main water valve counterclockwise, then flush the toilet. Inspect the bowl for remnants of lime deposits. If some limescale remains, turn the water off, add vinegar and baking soda, and then scrub the toilet again.
Apply lemon juice or vinegar to taps for limescale removal, mixing with baking soda and making a paste if the limescale is persistent. Paper towels, rags, lemon juice, white distilled vinegar, a plastic bag, a rubber band, a toothbrush and an all-purpose cleaner are needed. Depending on the amount of limescale, removal can take from 5 minutes to one hour.Full Answer >
Musty smells are removed from books by using a variety of household items such as baking soda, charcoal or kitty litter. Other items that can remove odors from books are talcum powder or fabric refreshers such as FeBreze.Full Answer >
To remove limescale stains from a toilet, apply a gel or bleach product made specifically for hard water stains, covering the deposits and squirting under the toilet rim. Let the cleanser sit for approximately 30 minutes before flushing the toilet.Full Answer >
The water level in a toilet bowl is adjusted using the fill valve. The fill valve determines the water level by controlling the position of the float. Raising the float arm increases the amount of water in the bowl while lowering it decreases the level of water.Full Answer >