Removing motor oil takes several days, as some products require time to take effect. The process requires kitty litter, liquid dishwashing detergent and a commercially available concrete degreaser. For persistent spots, purchase oil-eating bacteria for use in concrete stain removal.Know More
Spread inexpensive clay kitty litter on top of the oil, and allow it to sit overnight to absorb oil on the surface. Remove the litter from the concrete, and dispose of it in an appropriate manner.
After removing the litter, it is likely that some the oil stain remains. Use a grease-dissolving dishwashing soap, and scrub as much of the stain away as possible. If the stain hasn't set too deeply into the concrete, this is sometimes all that is needed to remove it.
If the stain is still visible, use a commercially available concrete degreaser. Apply the solution, and follow the label directions to remove the stain.
If stains remain after using a degreaser, use commercially available oil-eating bacteria. These products include the same bacteria used to clean oil spills from beaches. They penetrate the concrete and seek out the oil. Once they have exhausted their food supply, they die, leaving the concrete free of oil stains.
Remove oil stains from upholstery by blotting and applying baking soda and a dry cleaning solution. The process requires only a few steps.Full Answer >
Remove oil stains from asphalt concrete by first applying an absorbent material and allowing it to soak up the fluid. Then sweep up the debris and scrub the driveway using baking soda and water. Apply heavy-duty laundry detergent to any remaining traces of oil and scrub again.Full Answer >
To remove cooking oil stains, scrape excess oil off with a butter knife, rub liquid dish detergent into the stain, let the item sit for five minutes, wash the item with the hottest recommended water for the fabric, and check for any remaining stain before drying. Rewash the item before drying it if any of the stain remains.Full Answer >
Remove oil stains from clothes by pretreating them with a solvent-based stain removal product, waiting 10 minutes and then washing the clothes with the hottest water recommended for the fabric. Check the stained area before putting the clothing in the dryer, and repeat the steps if necessary.Full Answer >