Removing oxidation from aluminum siding is often a simple process, but it may be exacerbated if the oxidation is especially heavy in certain areas. To get started, evaluate the amount of oxidation and decide what level of product you will need. Get the appropriate commercial oxidation product, a soft brush, some buffing cloth, sandpaper and a power buffer if dealing with heavy oxidation.
If the oxidation is not very extensive, then a minor oxidation product without acid should be able to take care of the problem. Most of these products are either sprays or paste and can be applied to the problem areas very easily. Afterwards, buff and clean the areas.
If the initial cleaning doesn't work, prepare the oxidation product with a higher concentration than before. Spend some time and effort before moving on to the next step, as stronger oxidation products may cause problems.
If using a basic oxidation removal product or solution at the highest percentages does not work, you may need to switch to a more powerful product. These products often cause issues as they normally contain acids which may end up damaging the base aluminum. If using heavy oxidation products, be sure to buff up the siding in advance. Have sandpaper on hand to remove any pitting.
Clapboard siding is commonly used for siding on a building's exterior walls. It is made from wood planks cut to a certain length and width. Clapboard is a traditional siding material that was used in colonial America because early settlers had ample supplies of wood to cut planks.Full Answer >
According to Home Guides, caulking the seams around a window is the best and easiest way to seal a window with vinyl sidings. Due to the nature of vinyl, as a plastic, there is a tendency for a vinyl window frame to expand, contract and warp with changes in temperature over time. Therefore, it is important to choose a silicone or polyurethane-based caulking product.Full Answer >
To repair cedar clapboard siding, remove the damaged pieces and vertical caulk joints, section out the damaged clapboard, patch any damage, install new cedar clapboards and paint. Repairs can be completed over a weekend and require cedar clapboards, pressure-treated wood, nails, epoxy, oil primer, paint, latex caulk, a paint brush, paint tray, nail set, hammers, saws, a utility knife, chisel, drill and a sledgehammer.Full Answer >
Installing four-by-eight sheets of plywood siding is a quick way to finish a home. The sheets offer several options for finishing, such as natural stains or painting.Full Answer >