The repair of a leaking Price Pfister faucet begins by shutting off the main water line. Insert a drain stopper to prevent smaller parts from falling off. Remove the faucet handle, and loosen the collar near the faucet base. Remove the entire faucet and check the O-rings inside the stem assembly and those around the collar base. Replace all worn out O-rings with new ones from the Pfister repair kit.Know More
Ensure the faucet is off before beginning the repair process. Use a drain stopper to prevent the draining of small parts and unscrew the faucet handle using an Allen wrench. Wrap a rag around the faucet collar before you start loosening it using a wrench. The rag protects the surface coating of the faucet collar against scratches during the loosening process. Unscrew the nut, retaining the stem assembly, and pull out the entire assembly.
The cause of most leaking faucets is faulty O-rings, so check the O-rings inside the stem assembly and those around the collar base. Remove the O-rings found in the stem assembly and check for abrasions, marks or tears. Replace all worn out O-rings with new ones from the Pfister repair kit. Remove the springs inside the stem assembly with needle nose pliers, and replace the worn-out springs if necessary. The final step is reassembling all parts, turning the water on and re-checking for leaks.Learn more about Plumbing
Repair a leaking Moen kitchen faucet by replacing the cartridge. This fixes a faucet that is leaking at the handle or one that does not shut off.Full Answer >
The best place to locate a water softener is in a basement, garage or utility room near a main water line, electrical outlet and a drain. The area should be level, dry and not subject to freezing temperatures.Full Answer >
According to "This Old House" magazine, effective methods for removing a stubborn old faucet include lubricating the coupling, careful hammering and gentle heating. If these methods do not work, the remaining option is to use a faucet puller. This is a small metal hand tool that exerts tremendous pressure on the faucet without exhaustive human effort.Full Answer >
According to the San Francisco Gate, the leading cause of sputtering water faucets is trapped air in the plumbing lines. The quickest way to stop the sputtering is to expel the air by turning on all available faucets simultaneously. This increases the velocity of the water passing through high points in the piping, where air pockets form, blasting the air out and restoring proper water flow.Full Answer >