The only protection T1-11 siding has against the elements is a coat of paint. Therefore, it is very susceptible to rotting in areas with high humidity levels. If the siding has begun to rot, it can usually be cut out and patched. However, a total replacement is often necessary because it is usually installed without any sheathing underneath it to protect the framing of the house.
First, you need to inspect the damage. Mold, wood rot, and water damage are the characteristics to look for. If the affected area of siding is more than to two to four inches, the next step is to replace the affected panel. In the case of mold, the panel will need to be removed and have a professional inspect and treat the area, preventing the re-growth of mold. T1-11 siding always comes in panels that are easily installed.
If a patch is required, locate two framing studs close enough to the patch. If the area you want to patch is not between two studs, you will need to cut a horizontal crossbeam to hold the patch in place. Use a framing square and tape measure to calculate the correct dimensions. Then, cut a piece with a jigsaw.
Attach your T1-11 patch with four 8d penny nails and apply caulk to all edges of the patch. Administer a coat of primer and paint to match the rest of the siding on your home.Learn More
T-111 siding is made of plywood and often suffers rot due to moisture. Splicing a new piece to repair the damaged one is often a better solution than replacing the entire 4-foot by 8-foot sheet of material. Gather the needed materials, including a piece of T-111 for the patch, tape measure, circular saw, pry bar, electric drill and appropriate screws.Full Answer >
Crane siding is a line of vinyl siding produced by the company Crane, usually referred to as “Craneboard” siding. Craneboard siding does not need painting and doesn't warp or peel. It comes with a lifetime workmanship warranty that transfers with the sale of the home.Full Answer >
According to DIY Doctor's Mike Edwards, replacing a lintel requires taking down sufficient wall to access the lintel, removing the lintel, replacing it and then rebuilding the wall. While the lintel is being replaced, props are required to support the wall and prevent it from falling down. Edwards suggests using temporary support equipment such as Acrow props for this purpose.Full Answer >
Installing stone siding is a process that requires various steps to protect the inner structure from moisture damage and ensure the secure fit of the siding. Depending on the size of the area in which the stone siding will be applied, the task will require a weekend or longer.Full Answer >