Q:

How do you restore antique mirrors?

A:

Quick Answer

To restore an antique mirror, remove the frame, strip the glass, apply silver leaf, and paint over it. This two-day project requires a screwdriver, soap, safety gear, water, rags, blocks, a pan, paint stripper, silver remover, sizing, a scraper, silver leaf, black paint, felt and waxed paper.

Know More

Full Answer

  1. Prepare the mirror

    Pop the glass out of the frame, and wash it with mild soap. Dry it with a rag, and set it on your work surface with the back facing up.

  2. Strip the backing and old silver

    Put on rubber gloves, apply paint stripper to the back of the glass, and leave it on overnight. On the following day, peel away the old paint, and swab the glass with a wet rag. Put on gloves, goggles and a mask, and then apply silver remover according to the manufacturer's instructions. Scrape off the old silver leaf.

  3. Apply silver leaf

    Place two wooden blocks along one edge of a shallow pan. Lay the glass in the pan with the back side up, and prop one end up on the blocks. Brush it with sizing. Place a sheet of waxed paper over a sheet of silver leaf, and gently rub it until the silver adheres to it. Lift up the waxed paper, and lay it on the glass with the silver side down. Rub the paper with a fingertip to transfer the silver leaf to the glass, and slowly peel away the waxed paper. Repeat until the glass is covered with silver. Let the glass cure for eight hours, and then rub the silver with a felt cloth, starting from the center and working out to the edges. Apply a second coat of silver leaf using the same technique.

  4. Apply black paint

    Cover the silver leaf with black paint, give it 12 hours to dry, and put the glass back into the mirror frame.

Learn more about Antiques

Related Questions

  • Q:

    What can you do with antique crocks and jugs?

    A:

    Antique crocks and jugs are excellent when used as kitchen utensil holders, cookie jars, vases, planters and bookends. Lidded stoneware crocks are also popular for curing homemade pickles and holding crafting supplies.

    Full Answer >
    Filed Under:
  • Q:

    What are antique corkscrews?

    A:

    An antique corkscrew is a mechanical device that dates from long ago and is designed to remove corks from bottles, including beer, wine and medicine bottles. One end has a spiral metal bar with a sharp tip, and the other end has a transverse handle.

    Full Answer >
    Filed Under:
  • Q:

    What is an antique microscope?

    A:

    Antique microscopes available to collectors are typically commercially manufactured devices from the 1800s that allowed scientists to view objects too small to be seen with just the eyes. Most microscopes from the 17th and 18th centuries were made by the scientists using them. They are now usually museum pieces.

    Full Answer >
    Filed Under:
  • Q:

    What are antique razors?

    A:

    Antique razors are typically straight razors valued by collectors and dating as far back as the 17th century. The blades of antique razors are typically made of steel, but the handles show more variety and can be made of wood, sterling silver, bone, mother-of-pearl or tortoise shell.

    Full Answer >
    Filed Under:

Explore