Restore the shine to hardwood floors by removing dust or dirt using a vacuum or dust mop, cleaning the floor with a hardwood cleaner, and buffing the surface of the floor until it is dry. The amount of time needed to complete the process depends on the size of the room.Know More
Before attempting to damp mop the floors, remove all dust and dirt. Use a vacuum or dust mop to remove loose accumulations instead of a broom that sometimes scratches the finish. Adding moisture to the existing dust robs the floors of their shine.
If the floor is new, check with the manufacturer, who might recommend a specific cleaner for the floor, as most manufacturers offer proprietary brands. Otherwise, use a hardwood cleaner that's designed for floors, and follow the instructions on the bottle. Avoid using too much cleaner, as buildup can make the floor look dull.
Once the floor is clean, buff it with a microfiber cloth or other absorbent material to dry. Allowing the hardwood floor to air-dry causes streaks and dulls the shine.
If the floor remains dull, wax buildup might be the problem. Remove the wax using an appropriate commercial product.
Most of the time, caring for hardwood floors means using a dust mop or vacuum to remove any dirt that is tracked into a home. Occasionally, these floors require deep cleaning. Use a hardwood approved cleaner, a sponge mop and a bucket to remove the buildup of dirt, grime and oil.Full Answer >
Cleaning hardwood floors is a matter of careful maintenance and preventative steps to stop damage from occurring before it has a chance to destroy a floor's finish. It is important to approach this process intentionally and carefully, as repairing damage to hardwood floors is expensive and time-consuming.Full Answer >
Remove shallow dents from hardwood floors by steaming them out. For deeper dents, apply a filler to level out the area. As heat can discolor some types of finishes, you may need to refinish the steamed out dent and the surrounding area to match.Full Answer >
For routine cleaning of slate floors, sweep the floor, use a dust mop to remove fine dust, finish with a damp mop soaked in a detergent solution, and allow the floor to air dry. Use a mild detergent to prevent damage to the slate.Full Answer >