Q:

What is the standard handrail height for stairs?

A:

Quick Answer

According to Occupational Safety and Health Administration (OSHA) requirements in the U.S., the majority of stair handrails must be between 30 and 37 inches in height. The measurement is from the upper surface of the handrail to the surface of the tread, which is in line with the face of the riser at the forward edge of the tread.

Know More
What is the standard handrail height for stairs?
Credit: Bryan Mullennix Getty Images

Full Answer

In residential homes, the standard height recommendation is 30 inches. There is leeway to adjust this height according to the height of the home's occupants. Local building codes can affect placement of the handrail, sometimes based on the type of structure involved. Commercial buildings require a safety inspection, preferably before installing the proposed handrails.


Is this answer helpful?

Similar Questions

  • Q:

    How do you reinforce squeaky stairs?

    A:

    According to This Old House, most of the time the only reinforcement squeaky stairs need is tightening up the fasteners that keep each part together. Stairs are built from dozens of individual parts joined together, and the squeaking could come from any of the places where the treads you actually step on meet the others. Check each part of the squeaky steps to learn where the problem area is.

    Full Answer >
    Filed Under:
  • Q:

    How many stairs equal a flight?

    A:

    According to Wonderopolis, a flight of stairs does not contain a particular number of stairs or steps. The number of steps in a flight varies widely from building to building, and flights of stairs in a building also vary by the number of steps included in a flight.

    Full Answer >
    Filed Under:
  • Q:

    How many steps are there in a flight of stairs?

    A:

    The average flight of stairs contains 12 steps. For a person weighing between 150 and 160 pounds, climbing one flight of stairs three times per day burns approximately 15 calories, according to the Health Sciences Center of the University of New Mexico.

    Full Answer >
    Filed Under:
  • Q:

    How do you design and build pull-down attic stairs?

    A:

    To design and build pull-down attic stairs, begin by inspecting the attic and carving out the necessary space with a jigsaw. Install supports around the hole to preserve the structure, and attach the stairs to the hinges by following the instructions on the wooden attic stairs kit. This project also requires wrenches, plywood, 2-by-6 lumber, an extension cord, tape measure, set square, plywood, lights and a pencil.

    Full Answer >
    Filed Under:

Explore