The National Health Service of the United Kingdom recommends three methods: sterilizing bottles using a cold water sterilizing solution, steam sterilizing and sterilizing by boiling. Use hot, soapy water and a bottle brush to clean your baby's feeding bottle immediately after a feed. Wash the bottles in cold running water before sterilizing.Know More
To sterilize bottles using cold-water sterilizing solution, the NHS recommends following the manufacturer's instructions and changing the solution every 24 hours. Immerse the bottles in the solution for 1/2 hour with a floating cover. Ensure that there is no air trapped in the bottles or teats when you place them in the sterilizing solution.
Steam sterilizing involves the use of an electric sterilizer or microwave, states the NHS. Check the manufacturer's instructions first, as sterilizers vary widely in usage, and read the manufacturer?s guidelines on the suggested duration of leaving out equipment before it needs to be re-sterilized. The openings of the bottles and teats should be facing downwards in the sterilizer.
When sterilizing by boiling, boil the bottles in water for around 10 minutes while regularly checking that the bottles and teats are not torn or damaged. Make sure that all items are under the water's surface.Learn More
Clean a five-gallon water container by washing, sanitizing and drying. The process requires just a few minutes, but air-drying to prevent bacterial growth takes overnight. With proper care and cleaning of the bottle, most tap water remains in good condition for up to 90 days.Full Answer >
The easiest way to sterilize soil is by baking it in a 180-degree oven for 30 minutes. All you need to sterilize soil in the oven is a large baking dish, aluminum foil and a meat thermometer.Full Answer >
To sterilize sand, spread it in metal baking sheets a maximum of 4 inches thick, cover it in foil and bake it in the oven at 200 degrees Fahrenheit until the center of the sand reaches between 180 and 200 degrees Fahrenheit. Adjust the oven to maintain the temperature for 30 minutes. Keep covered until use.Full Answer >
Water's boiling point is 212 degrees Fahrenheit, so water must be at least that hot to sterilize. Water needs to be boiling in order to become sterilized.Full Answer >