Preventing basement seepage requires looking for the leak and sealing the cracks. For this project, you need a wire brush, caulk, a chisel, a hammer and hydraulic cement. Applying dry-lock sealant paint is an optional step, but it prevents water from seeping through the cracks, and it is a deterrent against moisture and dampness. You can also use epoxy or polyurethane as substitutes when filling in the crack.Know More
Search for leaky pipes or water seepage in the brick work. Look for cracks in the wall, and check for shifted slates outside of your property. Check the gutters to make sure that water is being directed away from the foundation. If you cannot find the leak, use a damp meter to locate the problem area.
Use a chisel and hammer to widen the crack to allow the cement to expand. Clean the crack with a metallic scraper to remove the residue, and clean out the crack interior with a wire brush.
Once the crack has been cleaned, use epoxy or polyurethane injections as alternatives. If you are not using polyurethane or epoxy, pack the cement into the crack, and use the scraper to ensure that the cement blends with the wall surface. Allow the cement to dry. Fill the crack with caulk.
Wet the wall, and apply sealant to the treated area.
This Old House recommends using a power auger, or snake, to remove clogs in the basement drain. A hand snake can be used to remove blockages if a power auger is not available.Full Answer >
The best place to locate a water softener is in a basement, garage or utility room near a main water line, electrical outlet and a drain. The area should be level, dry and not subject to freezing temperatures.Full Answer >
To install a basement toilet, first install basement plumbing, assemble the toilet, and remove the knock-out flange. Install a wax ring in the flange and secure the toilet on the flange. You need locking pliers, closet bolts, nylon washers, nuts, a hacksaw and bolt caps.Full Answer >
Fix hairline cracks in a broken cistern by filling the cracks with a porcelain sealer. Repair a cistern that overflows by adjusting the inlet valve correctly. Replace the siphon to fix a cistern that does not flush easily.Full Answer >