Q:

What table sizes can seat 10 people?

A:

Quick Answer

To seat 10 people comfortably, use a 66- to 72-inch diameter circular table, a 60-inch square table, a 30-inch-by-96-inch rectangular table or 48-inch-by-96-inch rounded oblong table. The rounded oblong table is also called a double-D table, made with two D-shaped tables.

Know More

Full Answer

A 60-inch square table can fit eight to 12 people. However, for eight people this size table offers a lot of space. For 12 people, the same table will be tight. If there is not enough space for a 66-inch circular table, a 60-inch table will fit 10 people, but not necessarily comfortably. A double-D table will fit 12 people comfortably.

Learn more about Furniture

Related Questions

  • Q:

    How do you get wax off a wood table?

    A:

    To get wax off a wooden table, harden the wax, use a blunt knife to scrape off large chunks, and use an iron on low temperature to melt wax that has been absorbed into the surface. Absorb the melted wax with paper.

    Full Answer >
    Filed Under:
  • Q:

    How do you refinish a drop-leaf table?

    A:

    Refinishing gives new life to old, dingy and damaged drop-leaf tables. The following method uses basic supplies and produces professional-caliber results. This one-person job takes about one day. The required supplies are 80 grit sandpaper, fine sandpaper, a cone mask, a clean tack cloth, plastic sheeting, a tinted wood stain, clear water-resistant sealant and a wide paint brush.

    Full Answer >
    Filed Under:
  • Q:

    How do I set up a snooker table?

    A:

    Arrange the red balls into a triangle on the far end of the snooker table from the "D" spot. Place the pink ball at the tip of the triangle, the black ball behind the triangle, the blue ball in table's center and other balls along the "D" spot.

    Full Answer >
    Filed Under:
  • Q:

    How do you refinish a metal table?

    A:

    Sanding, applying primer and painting are the key steps in refinishing a metal table. To make your metal table look new again, prepare a grinder tool, sandpaper, auto primer, auto-glazing compound, liquid metal filler, paint remover, paint and clear-coat finishing spray.

    Full Answer >
    Filed Under:

Explore