By checking the furnace's power supply, thermostat, filters, pilot and gas valve, a homeowner can determine why a furnace motor blower is not turning on or functioning properly according to popular contractor Bob Villa. Either the blower needs servicing or another component of the furnace could be causing it to malfunction.Know More
Step 1: Check the furnace for powerAn electric surge or a power outage can cause a fuse to blow or circuit breaker to trip. Ensure that power is flowing before continuing.
Step 2: Check the thermostat settings and replace the batteriesMake sure the batteries are fully charged and that the thermostat is on the "heat" setting with fan or auto. The temperature should be at least 3 degrees higher than the current room temperature.
Step 3: Check the filtersIf the filters need replacing, this could be causing the problem. Dirty filters limit airflow and can cause a blower to shut down. Replace filters once a month to prevent this problem.
Step 4: Check the furnace power switchA furnace has its own power switch that could have been accidentally turned off. If it is off, then turning it back on easily resolves the issue.
Step 5: Check the pilotIf the furnace has a pilot light that has been extinguished, then it needs igniting. Only complete this step if comfortable working with fire.
Step 6: Check the gas valveAs a last resort, make sure the furnace gas valve is on.
If these steps have been followed and the furnace motor blower is still not turning on, an HVAC repairman should be called for further assistance.Learn more in Heating & Cooling
A gas furnace flame sensor is part of an electric ignition system that is connected to the gas valve to control the flow of gas to the furnace. A flame sensor can come in both L or straight shapes, and it is part of the furnace burner's basic assembly.Full Answer >
In a gas furnace, the blower will continue to run if the fan switch on the thermostat is set to any setting other than auto. The blower on a furnace will also continue to run if its filter is extremely clogged.Full Answer >
Troubleshooting a furnace that does not turn off begins with examining it for a malfunction or clog. The thermostat, air filter and fuel supply can all be examined in less than an hour. If the error cannot be identified during these steps, contact your manufacturer and have a certified technician examine the furnace.Full Answer >
Furnace filters are available in a variety of stores, including hardware, home improvement, department and even drug stores. Individual manufacturers sell replacement filters for their own furnaces, and retailers list filters with online platforms such as Amazon.com and eBay.Full Answer >