To address an LE error on a LG dishwasher, let the dishwasher cool for a half hour after getting the error and restart the cleaning cycle. If the error code persists, the pump and motor assembly may need replacing.
The LE fault code on the LG dishwasher indicates issues with the pump motor and water circulation of the dishwasher. If a LE error code appears, troubleshoot and rectify the issue that is causing the error.
Turn off the dishwasher and let it cool for about 30 minutes. Restart the cycle.
If the error code persists after restarting the cycle, check the pump motor wire and wash impeller.
If the error code persists after checking the pump motor, wiring and impeller,, the pump and motor assembly need to be replaced.
Resetting the codes on a Kenmore dishwasher requires the owner to press all the control panel buttons, in order, within five seconds of each other. After pushing the buttons, the dishwasher attempts to conduct a 12-minute test cycle before the panel resets.Full Answer >
A GE Nautilus dishwasher may not drain if too much detergent is used, a kink is present in the drain hose or an object blocks the sump area in the rear of the dishwasher. It's normal for about 2 cups of water to remain at the bottom of the dishwasher.Full Answer >
The addition of salt to a dishwasher softens hard water and prevents the mineral deposits that cause scaling. Scaling is the insoluble scummy ring in the bathtub, for instance. Scaling also clogs pipes, coats the inside walls of appliances such as coffeemakers and causes water heater failure.Full Answer >
Reasons for a film on the dishes include too much detergent, unsuitable water temperature or hard water minerals. If the film will not come off when washed by hand, it could be a permanent etching caused by soft water and excessive heat or too much detergent.Full Answer >