Unblock a toilet without a plunger by reducing the amount of water in the toilet, adding in baking soda and vinegar, covering the bowl with a rug, adding hot water, and then flushing the toilet. You need baking soda, vinegar, hot water, towels, rubber gloves, a rug, and a bucket.
Reduce the amount of water in the toilet bowl using a cup or bucket. Wear rubber gloves to protect your hands from the dirty water.
Add 1/2 a box of baking soda to the water in the bowl.
Add 1/2 cup vinegar to the baking soda in the drain, and cover the drain opening with a rug to keep baking soda and vinegar from bubbling out of the bowl. Let the baking soda and vinegar bubble for 30 minutes to break up the clogged material. Cover the base of the toilet with towels, and have other towels handy to wipe away any bubbling liquid.
Remove the rug, and carefully pour hot water into the drain to help further clear the clog. Flush the toilet, and repeat entire process if the clog remains.
There are several quick alternatives to unclogging a toilet bowl drain without using a plunger, which include using a wire clothes hanger, pouring hot water solutions into the bowl and using a vacuum cleaner. A cheap plumbing snake can also be used to clear out the clog and it can sometimes do a better job than a plunger. More stubborn clogs may require the whole toilet bowl to be pulled out to clear it.Full Answer >
To remove a toilet bowl freshener that has fallen inside the toilet, use a plunger. However, be careful not to be forceful in pushing and pulling the plunger, as it may cause damage to the toilet bowl.Full Answer >
Steps to take to ensure that a toilet flushes properly include unclogging it with a plunger or auger, making sure that the water level in the tank is appropriate, and fixing any problems with the rubber flapper and lift chain. The precise solution depends on the immediate problem, so troubleshooting to discover this is required.Full Answer >
To repair a Toto toilet that does not flush, use a plunger. Use gentle force for the first push to expel the air and fill the bell with water, then use more force to clear the clog. Keep the plunger covered with water as you push and pull. This method eliminates most clogs in minutes.Full Answer >