To unclog a drain with a disposal unit, Family Handyman recommends first using a plunger to loosen the clog and force the material down the drain. Another way to clear a clog is to disconnect the drain trap connected to the disposal and clean it out. If that doesn't work, Bob Formisano of About Home Repair explains an auger can clean out a clog beyond the drain trap.Know More
If the garbage disposal makes a low humming sound when it is first turned on, Family Handyman states the cause is probably a jam. Switch the disposal off and unplug the unit before using an Allen wrench to turn the blades. If a dishwasher is connected to the disposal, clamp the flexible part of the drain before plunging to prevent dirty water from going into the dishwasher. Sometimes, a breaker automatically shuts down the disposal after the motor gets too hot. If this happens, give the unit a moment to cool before pressing the reset button on the bottom.
Some plumbing chemicals are safe to use with garbage disposal clogs. Items that commonly clog drains with garbage disposals include potato skins, banana peels, coffee grounds and eggshells. Drano states grease and oil can stick to the inside of pipes because these substances do not get broken up by garbage disposals. Applying drain chemicals augments the unclogging process.Learn more about Appliances
To restore flow to a drain with a garbage disposal, empty the sink, remove the trap, and clean it. Use a drain auger to clear any obstructions beyond the trap. Most homeowners can complete the process in less than an hour.Full Answer >
To clean your basement floor drain, begin with chemical drain-cleaning agents, but prepare to rent a power auger with a cable that you can feed down the drain to agitate the clog for cleaning. Be ready for considerable amounts of sand, soap scum, bacteria and laundry lint to emerge.Full Answer >
Repair a blocked garbage disposal by removing large items located inside the unit, twisting the hex hole located on the bottom of the disposal, or cleaning the waste pipe that is connected to the unit. Most blockages can be eliminated in less than an hour.Full Answer >
When dealing with a broken garbage disposal, there are many problems that might cause an issue. The most common problem is a clogged flywheel. To repair this problem, you need the offset wrench that came with the disposal.Full Answer >