The best way to paint aluminum is to clean it of chalk, mildew, dirt and other contaminants and then paint it with a good quality 100 percent latex paint. Aluminum that was previously painted may need to be cleaned with trisodium phosphate or primed before painting.
If when rubbing a finger over the paint, a transfer of white powder is visible on the finger, the trisodium phosphate is needed. This is because the paint has heavily weathered. Another option for the weathered surface is to use an oil-based or alkyd primer made for aluminum. If any bare areas of aluminum are found, they should be primed with a latex corrosion-inhibitive primer. Priming all of the aluminum instead of just the bare areas is not needed, but it can give a more even appearance when painted.
New aluminum that has been prepainted should be left to weather for at least six months before repainting. Sometimes the factory adds a wax or silicone finish that will affect the adhesion of paint if it's not weathered. A matte or flat type pf paint should be used on a surface that has dented. While satin or gloss finishes can look better at times, aluminum is susceptible to dents, and shinier paints may accentuate them.Learn More
The best way to polish aluminum is to buff it with a paste made from cream of tartar and a little warm water. This non-toxic, gentle solution removes tarnish without scratching soft aluminum finishes.Full Answer >
The best way to clean windows is not with a commercially prepared window cleaning solution, but with dish soap and water. You also need a single-edge razor, a window scrubber, a squeegee, a chamois, a bucket and old rags.Full Answer >
According to Better Homes and Gardens, the best way to clean wooden cabinets is by wiping them down with an oil-soap wood cleaner at least once a week. While kitchen cabinets come in a variety of finishes, general purpose wood cleaner is typically safe to use on most wooden cabinets. Always test a small area of the wood before applying any cleaner.Full Answer >
The best method for painting metal cabinets involves using a paint roller to roll the paint on the cabinet. Preparing the cabinet is an important first step to achieving the best results.Full Answer >