How to Change Rear Brake Pads?

Answer

In order to replace rear brake pads on a vehicle, make sure the car is in park with the ignition off and the front wheels are propped to prevent the car from rolling. Then, loosen the lug nuts on the tires and raise the rear of the car. Remove the caliper bolts that hold the old pads in place by turning in a clockwise motion and pull the pads off. Then, replace the pads with new ones bought at an auto part store and replace the caliper. Once the new pads are on, check for fluid leaks. To break in the new pads, drive at even speed for the next 100 miles on your car.
1 Additional Answer
Ask.com Answer for: How to Change Rear Brake Pads
How to Change Rear Brake Pads
Rear disc brakes are becoming more and more popular on cars and light trucks. They feature rear rotors, calipers and brake pads. Rear disc brakes work better than drum brakes and require no adjustment when the pad linings wear. Because there are so many... More »
Difficulty: Moderate
Source: www.ehow.com
Q&A Related to "How to Change Rear Brake Pads?"
You can change rear brake pads by removing the wheel, then taking the calipers off. Take the rotor off so you can put a new one on, then reinstall the caliper along with the new brake
http://answers.ask.com/Vehicles/Other/how_to_chang...
Knowing how to change rear brake pads may not seem important, since front brakes provide as much as 80% of the required braking power. Rear brakes pads are important, however, as
http://www.life123.com/cars-vehicles/vehicle-maint...
1. Insert a clean hand pump into the master cylinder and pump out about 1/3 of the brake fluid into a small cup. Replace the master cylinder cap or cover. 2. Loosen the wheel nuts
http://www.ehow.com/how_5533417_change-rear-brake-...
1 Drain some of the brake fluid out of master brake cylinder with a suction gun. Place the old fluid into an approved container and take it to an approved center to discard it. Ad
http://www.wikihow.com/Change-Honda-Rear-Disc-Brak...
Explore this Topic
You can change rear brake pads by removing the wheel, then taking the calipers off. Take the rotor off so you can put a new one on, then reinstall the caliper ...
You can change rear brake pads by removing the wheel, then taking the calipers off. Take the rotor off so you can put a new one on, then reinstall the caliper ...
You can change rear brake pads by removing the wheel, then taking the calipers off. Take the rotor off so you can put a new one on, then reinstall the caliper ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014 Ask.com