How to Reset the SRS Light on a Mercedes?


An OBD scan tool is required to reset the SRS light on a Mercedes. Open the fuse panel and plug the OBD scan tool into the correct port. Turn the key to the 'on' position and write down the codes displayed by the scan tool. Check these codes in the owner's manual and have appropriate repairs made. The SRS light should then turn off.
Q&A Related to "How to Reset the SRS Light on a Mercedes?"
1. Locate the fuse panel cover and remove it. This is located on the lower left side of the control panel on the driver's side of the car. Find the port that fits the OBD cable and
Trade the car in for a Nissan.
It means something is wrong with your airbag. SRS, the official name for the airbag system is short for Supplemental Restraint System, since airbags were developed back during a time
The SRS light on the dash indicates a
1 Additional Answer Answer for: Mercedes SRS Light
How to Reset the SRS Light on a Mercedes
When you see the Supplemental Restraint Systems (SRS) light illuminated on the control panel of your Mercedes, it means there is a problem with the airbags or the seatbelt tensioners. When there is a malfunction in the vehicle, codes are stored in the... More »
Difficulty: Easy
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2015