Dodge Durango Recall Ball Joint?


In December 2004, DaimlerChrysler AG issued a statement confirming that they were issuing a recall on 600,000 Dodge Dakota pickups and Dodge Durango SUV's. The recall was for vehicle model years 2000-2003. After a sixteen month investigation, it was found that the upper ball joints of the vehicle could fail causing the suspension to collapse and a wheel to fall off, according to The National Highway Traffic Safety Administration. At the time of the recall, no injuries were reported due to the failure of the ball joints.
Q&A Related to "Dodge Durango Recall Ball Joint?"
Four, two upper and two lower.
1. Ensure that the truck's front end is properly raised and supported onto jack stands with the correct wheel removed. Raise a floor jack to support the lower control arm if you are
A word of advice, Replacing the ball joints is not for the faint of heart. You'll need a couple of special tools to get it done quickly and with a minimum of trouble. Before taking
With the right tools it takes about 3 or 4 hours and then you will also have to do a wheel alignment. Eric autotech155. Source(s) ase certified auot tech foe 32 years.
Explore this Topic
Four, two upper and two lower. ...
The 2000 Dodge Durango has been recalled four times since its first recall in May 2001. The first recall was for the air bag component and potentially affected ...
The 2006 Dodge Durango recall is that, the rear suspension on the left side of the vehicle was damaged during its assembly. There was a lock-up issue with the ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014