What is wrong when my water faucet is sputtering?

Answer

According to the San Francisco Gate, the leading cause of sputtering water faucets is trapped air in the plumbing lines. The quickest way to stop the sputtering is to expel the air by turning on all available faucets simultaneously. This increases the velocity of the water passing through high points in the piping, where air pockets form, blasting the air out and restoring proper water flow.

The most effective way to expunge air in plumbing lines is to turn on the hot and cold taps of every sink, shower and bathtub, beginning in rooms closest to the household's water shutoff valve. Flush all of the toilets as well. If the house has laundry machines or an electric dishwasher, run them.

The San Francisco Gate explains that eradicating huge air pockets takes up to 15 minutes. Leave the water on and walk through the house, noting which faucets are sputtering and which have normal water flow. When the sputtering disappears entirely, turn off the faucet the farthest distance from the main water supply valve. If there is a toilet in the room, flush it after closing the faucet. Repeat this process throughout the house, flushing the toilets only after closing the faucet.

This technique eradicates most sputtering problems without expensive professional intervention. If the sputtering continues, however, seek assistance from a certified plumber.

Q&A Related to "What is wrong when my water faucet is sputtering..."
The aerator on the tip of your faucet filters the tap water and as a result, bits of debris such as dirt and sediment can collect behind it and clog the aerator over time. This results
http://www.ehow.com/info_12048322_wrong-water-fauc...
Answer Often a faucet will sputter if there is air in the lines. This happens if the water has been turned off and then on again. If this is the cause, it is only necessary to run
http://wiki.answers.com/Q/Why+is+your+faucet+sputt...
That is normal. what happen is the water was shut off totally due to repair in some area then when it turn back on there's an air pressure build up at the pipe line. so all you can
http://answers.yahoo.com/question/index?qid=201308...
Thanks for the question. It you reamove the screen at then end of the faucet and run the water does it always work? if so then you can replace the screen(s) If that is not the
http://en.allexperts.com/q/Plumbing-Home-1735/Moen...
Explore this Topic
The reason why water pipes groan and moan when a faucet is turned on is, because there is air in the water lines. When you turn the faucet on it sucks the air ...
The easiest and fastest way to try to remove air from water pipes is to open all faucets at once running only on about a medium stream. Allow to run for about ...
To remove air from your water pipes, begin by turning on all faucets throughout the house. Next, flush each toilet several times to allow water to go through the ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014 Ask.com