How to Restring a Weed Eater Featherlite SST?


To restring a Weed Eater Featherlite SST you need to undo the wrapping string by turning over the whacker. Next, you need to install new string. Finally, you need to fix it tightly in place.
1 Additional Answer
Featherlite weed eaters are a great choice for people who have back problems, as the shaft is curved. They are also very light and easy to maneuver. If you are wanting to get under vegetation, some Featherlite models may not be right for you, as the shaft is bent and makes it hard to reach in tight areas. The trimmers are easy to fix, and are relatively inexpensive. The prices for the Featherlite trimmers are approximately $80.00, and go up to as much as $100.00 for the straight shaft trimmer.
Q&A Related to "How to Restring a Weed Eater Featherlite SST?"
1. Grasp the tap button firmly and pull to remove the spool. Wipe the surface of the hub and spool. 2. Cut the 25-foot length of .08 diameter line in half with the scissors. Insert
2 cycle oil. You can purchase it from any home improvement store.
Could also be a dirty carb, or a bad diaphram. But one simple way to clear the engine after flooding is to remove the spark plug wire from the spark plug and briskly pull the pull
To string a weed eater you can make sure you have the right string for it cause they come in all different diamers. You can then flip it upside down, put your hand in the middle and
Explore this Topic
1. Remove the cover from the string head assembly by firmly pulling on the tap button located on the end of the assembly. 2. Pull the spool out of the trimmer ...
If you have a featherlight weed eater that wont start then troubleshoot it with the manual it cam with. If that does not work try calling the service number it ...
Why your Featherlite Weed Eater SST25 doesn't start can be for any number of reasons. It could be you need to clean or replace the spark plugs or you may have ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014