Gas dryers are less expensive to operate than electric dryers and dry clothes faster. In many homes, a gas outlet is already in place. To install the unit you need a gas valve, pipe wrench, flexible gas pipe connector and pipe thread lubricant. Installation should take less than 1 hour.
The new dryer should fit in the same location as the old dryer. Disconnect the old dryer from power and the vent. Move it out of the way.
Even though your home has natural gas installed, builders don't always install an outlet for the dryer. Contact a plumber to install the outlet if one is not present.
Go to the meter that serves the home. Turn the valve so it's perpendicular to the pipe from the meter.
Gas lines that are not in use should have a cap in place. Use the pipe wrench to remove the cap, apply thread lubricant and install an appropriately sized valve for the connector you are using.
Connect one end of the flexible pipe to the dryer and the other to the valve. Connect the dryer vent. Plug the dryer into a 110-volt electrical outlet.
Turn the gas on at the meter. Open the valve behind the dryer. Test the connections for leaks.
Move the dryer into position, and level it by adjusting the legs.
1. Examine the initial investment. According to the California Energy Commission, gas dryers cost about $50 more than comparable electric dryers. Also compare the additional cost
So long as you already have the right plug and a dryer vent, this is a snap. Just switch out the dryers. If you do not have a vent or a good outlet, call an electrician.
Very carefully, of course. You need to calculate the power in watts in the gas, then get an electric heater with a blower that produces the same power. Since gas is cheaper than electricity
Really depends on where you live; electricity costs per kilowatt hour vary largely state to state. Overall though, a dryer uses something like 3% of typical household energy usage