How do Hydraulic Flow Control Valves Work?

Answer

Hydraulic flow control valves are a part of a hydraulic system that is used to regulate the flow of the hydraulic fluid throughout the hudraulic system and adjust the speed the fluid can go.
1 Additional Answer
Hydraulic flow control valves work by providing a backup source for a mainline valve that may have burst. This is only a temporary fix however and needs to be rectified as soon as possible.
Q&A Related to "How do Hydraulic Flow Control Valves Work?"
1. Depressurize the hydraulic system. This could be as simple as turning the pumps off for a pump operated system. Consult your particular system documentation if your system is pressurized
http://www.ehow.com/how_7707416_install-hydraulic-...
Most flow control valves work on the principle that the orfice is restricted and a spring loaded relief valve lets the excess flow return to tank. The orfice restricting the flow
http://www.webanswers.com/science/how-does-work-hy...
The number is four ways in and out of oil. Way valves in the hydraulic system with a number of ways in and out of the way oil and positioning are introduced. For example, two-position
http://wiki.answers.com/Q/What_is_a_4_way_hydrauli...
( ′flō kən′trōl ′valv ) (engineering) A valve whose flow opening is controlled by the rate of flow of the fluid through it; usually controlled by
http://www.answers.com/topic/flow-control-valve
Explore this Topic
Your hydraulic control valve works, by using a spring that is contained inside of the valve. When the spring is under pressure it can diverge the flow of the fluid ...
1. Depressurize the hydraulic system by turning off the system pumps. 2. Remove the electrical power from the system pumps, if applicable. Do this by disconnecting ...
1. Depressurize the hydraulic system by turning off the system pumps. 2. Remove the electrical power from the system pumps, if applicable. Do this by disconnecting ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014 Ask.com