How to Remove Lawn Mower Blades?

Answer

Ensure that the lawnmower is not running and allow it to cool completely then remove the spark plug wire. Remove any debris from the lawnmower deck area and brush away any grass clippings or twigs from the drive belts and deck top. Gain access to the blade compartment by either turning the mower over or by removing the mowing deck completely depending on the model of the lawnmower. Be sure that all gas has been siphoned from the gas tank before the turning unit over. Check the oil cap and ensure it is also secure. Place a block of wood between the mowing deck and the tip of the blade. This prevents the blade from turning when removing the bolt. Then find a socket that will fit the bolt holding the blade in place and then loosen the bolt. Slowly and carefully remove the blade from the spindle and slide the new blade over the spindle then return the bolt to the spindle screw. Tighten the bolt or the nut to specified torque requirements in the owner's manual of the lawnmower.
Q&A Related to "How to Remove Lawn Mower Blades?"
To begin with be sure your lawn mower is out of gas then turn the mower over, and remove the nut that holds the blade. After you take off the bolt remove the blade and then place
http://answers.ask.com/Business/Other/how_to_chang...
Disassemble the Blade Assembly Disconnect the spark plug wire so no power will reach the lawn mower blade. Tilt the lawn mower onto its rear wheels. Use a wooden block to secure the
http://www.ehow.com/how_2191882.html
1 Unplug the spark plug to prevent any unsafe repair conditions. A precaution perhaps, but best to heed. Ad 2 Drain gas with syphon hose; self syphon pumps are sold at any hardware
http://www.wikihow.com/Change-a-Lawn-Mower-Blade
Set the mower on a work tabletop to access the blade(s) If it is a riding mower, put it on ramps. Locate the bolt(s) that secure the blade. Hold the blade in place with one hand while
http://wiki.answers.com/Q/How_do_you_change_lawn_m...
Explore this Topic
To change the blade drive belt on a Poulan riding lawn mower you would first remove the mower deck from the tractor. You would then remove the belt off the pulleys ...
To begin with be sure your lawn mower is out of gas then turn the mower over, and remove the nut that holds the blade. After you take off the bolt remove the blade ...
To change the blades on your lawn mower, simply unscrew the old blade and then bolt on the new one. Be careful when working with sharp objects. ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014 Ask.com