How Do I Check to Oil in the Rear Differential of a Jeep Wrangler?

Answer

If you can change your oil then changing the rear differential is easily understood. You will need; paper towels, a rubber mallet, wrench, torque wrench (optional), brake/carb cleaner, wire brush, gasket scraper, drain pain, funnel, and gloves. You can find more information here: http://jeephorizons.com/tech/diffoil.html
Q&A Related to "How Do I Check to Oil in the Rear Differential..."
3 quarts per axle
http://wiki.answers.com/Q/What_is_the_lube_oil_cap...
1. Drive the front of the Jeep up onto car ramps and then apply the parking brake. 2. Lift the rear axle of the Jeep with a hydraulic jack and then support the rear axle onto jack
http://www.ehow.com/how_5891537_change-jeep-rear-d...
You will need 2 Bottles of SAE 80W-90 GL5 Gear Oil for
http://www.chacha.com/question/what-type-of-oil-go...
I'm guessing that you're talking about the differential side bearing, the ones inside the differential pumpkin? It can be done as a backyard job, but you'll have your work cut out
http://answers.yahoo.com/question/index?qid=200803...
Explore this Topic
1. Position a wide oil drain pan under the rear differential of your Jeep. Remove the retaining bolts along the bottom edge of the differential cover with a socket ...
1. Position a wide oil drain pan under the rear differential of your Jeep. Remove the retaining bolts along the bottom edge of the differential cover with a socket ...
1. Locate the two plugs on the back of the transfer case. You can get to the transfer case from the rear of the jeep. There will be a skid plate below the transfer ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014 Ask.com