How to Replace the Element in a Water Heater.?


1. Cut off the power to the water heater at the circuit breaker in the main panel box. Test for power at the water heater with the voltage meter. 2. Shut off the water flow to the heater at the supply valves located just above the tank. Attach the
Q&A Related to "How to Replace the Element in a Water Heater."
ring a plumber up.
Your working is good, the formula is at fault - the bit in brackets should be flipped. Voltage x Current x Time = Energy supplied via the pack. Rise in temperature x 4200 x Mass of
First thing is to cut power supply off at the breaker box. Next turn main water to the water heater off. Once power and water is cut of to the water heater you are now ready to drain
Explore this Topic
To replace a water heater element you will need a large socket, a screwdriver, a new element, screws, a new o-ring and new screws in case you strip the old ones. ...
Hot water heaters have a special tool for removing the element which are pretty cheap, and you'll need one to remove it. Once you have the tool, remove the element ...
Turn the power for the water heater off at the Electrical Service Panel. Drain the water heater and remove the access panel. Unhook the wires from the heating ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014