How do you use a heat gun for embossing?

Answer

To emboss using a heat gun, stamp your image onto a piece of paper and cover generously with embossing powder. Turn the heat gun on and wait for it to get to its full heating power. With the heat source a couple of inches from the surface of the paper, apply even heat to the image. After a few seconds, you’ll see it start to puff up and the colour will change. When the whole image is puffy and a consistent, dry the colour and you’re done.
Explore this Topic
To remove tile adhesive from drywall, use a heat gun to heat the drywall. You can then scrap the adhesive with a brush to remove. Once you have scraped off as ...
Linoleum tiles can be removed be using a heat gun, that will melt the glue under the tile, then use a scraper, some acetone and some rages to clean any glue that ...
To make a net gun you must gather many tools. They are a saw, a drill, a heat gun, 3/16' and 7/16' drill bits, a tape measure, a utility knife, a dremel tool, ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014 Ask.com