How to Use a Sharpening Stone?

Answer

To use a sharpening stone you hold in your hand or set on a flat surface and you can sharpen things such as the knives, scissors, razors, chisels, and plane blades. It is usually made of ceramic or diamond stone.
2 Additional Answers
Ask.com Answer for: how do you use a sharpening stone
Correct Way to Use a Sharpening Stone
A properly sharpened knife blade makes cutting effortless. The difference between a dull blade and a sharp one is the most noticeable when cutting things like tomatoes or raw meat. Even with the best and sharpest knives, they will inevitably become dull... More »
Difficulty: Moderate
Source: www.ehow.com
To use a sharpening stone , hold the knife in your right hand (reverse if you are left handed), with the side of the knife perpendicular to the floor, and the blade away from you then place the tip of the knife on the sharpening stone, holding the knife in one hand, and carefully placing your finger tips along the non-blade side of the knife's flat side, that is facing you again hold the edge against the stone at a 20 degree angle then the sharp edge will remain on the stone, while the spine of the knife is lifted at the 20 degree angle again draw the blade over the stone, keeping even pressure on the knife and finally draw across the stone until you reach the heel of the knife's blade. Keep pressure on the knife the entire time.
Q&A Related to "How to Use a Sharpening Stone?"
How to use a sharpening stone can really be beneficial to help keep your knives sharp. It will really help keep the sharpest blade possible on your knives. I found a video that demonstrates
http://answers.ask.com/Business/Other/how_to_use_a...
1. Lay down a towel, newspaper or cardboard to protect your work surface. Sharpening with water stones can create a muddy slurry. 2. Fill a container with water and set your water
http://www.ehow.com/how_6516959_sharpen-water-ston...
Whetstones, these were made from slate by the Vikings but the modern whetstone is made from Silicone carbide.
http://wiki.answers.com/Q/How+do+you+sharpen+tools
A whetstone is a flat stone for sharpening edged tools or knives. Anything
http://www.chacha.com/question/what-is-a-knife-sha...
Explore this Topic
1. Lubricate the sharpening stone. Moisten a rag with mineral oil. Rub a moderate coating of the mineral oil over the entire stone. 2. Place the sharpening stone ...
The first thing t do, when you want to sharpen a scissors with a sharpening stone is to open scissors and examine blades for burrs and then apply a few drops of ...
To sharpen something you first need a wet stone grinder or another sharpener. First you would clean what you want sharpened. Then you would check the existing ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014 Ask.com