Annealing Metal?


Annealing is a heating treatment that is used to make metals harder. first you will need to a furnace and heat it up to about 760 to 190 degrees Celsius. then place the metal in it the initial process will dissolve any impurities then the annealing process will continue..then let the metal to cool. Ensure that the temperature is maintains to achieve the Proper’s effect, do not overheat or under heat the furnace.
Q&A Related to "Annealing Metal?"
1. Apply a layer of flux evenly over the surface of the metal to prevent oxidation while you anneal the metal. Flux is made out from a borax acid compound. Flux is sold in both liquid
n A process of regulated heating and subsequent cooling to remove strain hardening or work hardening of metal.
Annealing. is the process of slowly raising the temperature about 50 ºC (90 ºF) above the. Austenitic temperature. It is held at this temperature for sufficient time for
You can soften metal (such as wire and plate) by heating it either with a torch or kiln and then quickly cooling, normally by quenching it with water. Again, I’m going to refer
Explore this Topic
Annealing, in metallurgy, is a heat treatment where material is altered, causing changes in its properties. Some of the changes are hardness and ductility. It ...
Annealing refers to the process of heating especially a metal or a glass and then allowing it to cool slowly so as to remove internal stress and toughen it. In ...
( ə′nēl·iŋ ′fər·nəs ) (engineering) A furnace for annealing metals or glass. Also known as annealing oven. ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014