Tweet
How to build a lift kit for a truck?
Answer
1. Examine the leaf springs in their current configuration. The basic setup is the springs are bolted to the top of the axle with long lag U-bolts or lag screws. Measure the current length of the bolts used to hold your leaf springs in place. Add tha
source: www.ehow.com
Ask.com Answer for: how to build a lift kit for a truck
How to Build a Lift Kit for a Truck
Many off roaders and four wheel drive enthusiasts are interested in upgrading their vehicles to perform better in off road conditions. One particular type of vehicle modification is the "lift," in which the body of the truck is lifted a few inches higher...
More »
Difficulty:
Moderate
Source:
www.ehow.com
Q&A Related to "How to build a lift kit for a truck?"
|
1. Inspect the existing leaf springs on your vehicle. Use measuring tape to determine the length of the existing U-bolts holding the leaf springs in place. Generally, leaf springs
http://www.ehow.com/how_7987187_build-lift-kit.htm...
|
|
1. Raise the truck on all four corners, and support it on jack stands. Support the rear axle on either side, then jack up the axle sufficiently to relieve weight on the spring. Using
http://www.ehow.com/how_4728395_remove-truck-suspe...
|
|
1. Park the Chevrolet and lift it with the jack so that the truck sits on four jack stands placed under the frame and the rear axle. Take off the wheels with the tire iron and put
http://www.ehow.com/how_8032848_install-lift-kit-c...
|
Similar Questions
Wikipedia on Ask.com
Top Related Searches
Explore this Topic
You begin building a lift kit for a truck by examining the leaf springs configuration, bolt the springs to the axle's top and then measure the length of the bolts ...
To build a monster truck you need a lift kit. That is just the start. Then put in a custom engine. A cool paint job is what will really make one monster truck ...
The first important steps that you will need to do to turn your existing truck into a monster truck is to get a lift kit and bigger tires. ...