Tweet
How to Change a Yale Lock?
Answer
VictorNumber1
To change a Yale lock, start by unscrewing the screws that hold the barrel to the plate, slide it out, and then attach the new one. Then, remove the screws from the new one, insert them in the appropriate holes, and then refit the back of the lock to the door by putting in the shank in the right slot. Lastly, turn it back until it is lined up and attach it to the door.
Q&A Related to "How to Change a Yale Lock"
|
They all went to Harvard.
http://wiki.answers.com/Q/How_did_the_yale_lock_ch...
|
|
1. Open the door that contains the Yale Lock you want to remove. Unscrew the two screws located on the faceplate of the lock. The faceplate is located on the side of the door. Pull
http://www.ehow.com/how_7922386_remove-yale-lock.h...
|
|
1. Remove the screws from the back of the deadbolt cover and pull off the cover plate. Take off the tailpiece assembly with the tool provided in the rekeying kit. Push the cylinder
http://www.ehow.com/how_7664832_rekey-yale-lock.ht...
|
|
1. Grip the key with one hand and the lock with the other. 2. Insert the toothed ridge of the key into the Yale lock keyhole. 3. Turn the key to the left one half-turn to open the
http://www.ehow.com/how_7460000_key-yale-lock.html
|
Similar Questions
People Also Asked
Wikipedia on Ask.com
The pin tumbler lock (or Yale lock, after lock manufacturers Yale (company)) is a Lock (device) mechanism that uses pins of varying lengths to prevent the lock from opening without...
Top Related Searches
Explore this Topic
A door Yale lock is fitted by carefully marking the position for the cylinder and the installation hole to be drilled. The mounting plate is bolted after the cylinder ...
To pick a Yale lock you will need a metal pry tool which can be made from two thin pieces of flexible metal. Bend one of the pieces at 90 degree angle to form ...
Installing a Yale brand lock is simple as long as you have the documentation that came with your lock. Each lock that Yale sells has different instructions. If ...