How to Cut Corrugated Plastic Roofing?


To cut corrugated plastic roofing, first lay it on a flat surface. Work through by measuring the corrugated plastic roofing on the areas you need to cut. Use a pencil to draw through it to guide you in cutting. Then start cutting to the desired length by means of a cutting tool.
Q&A Related to "How to Cut Corrugated Plastic Roofing?"
1. Lay the corrugated plastic roofing sheet on a flat work surface with the wavy ridges pointing toward you. 2. Measure the corrugated plastic to the proper dimensions using a tape
1. Cut the panels to the length. Use either a circular saw or a jig saw with metal blades. Most panels come up to 32 feet (9.8 m) in length. Allow for a minimum of 18 inches (45.7
A very sharp fine teeth saw and take you time cutting it slooowly. Don't fall asleep though I find it easier if they're all the same length and cut all the sheets altogether.
Be careful not to use snips as the material will crack around the cuts and could shatter. Use either a fine bladed hand saw which will take time to cut. Do not push the saw as this
1 Additional Answer Answer for: how to cut corrugated plastic roofing
How to Cut Corrugated Plastic Roofing
Corrugated fiberglass or PVC roofing, which can be translucent or opaque, works well for greenhouses, sheds and porch additions. It comes in 4- by 8- or 10-foot sheets, and you install it by screwing it to wooden or plastic braces. The braces are sawn to... More »
Difficulty: Moderate
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014