How do you disassemble a Kenmore dryer?

Answer

According to The Family Handyman magazine, the first step in disassembling a Kenmore dryer with the lint filter on the inside door is to remove the screws from the corners of the control panel. Next, flip the panel up and back to display the top panel's screws, remove the screws and lift the top panel off of the unit.

The next step is to open the bottom panel by releasing the panel's spring catches. This can be done by inserting a putty knife into the slots located directly above the catches. Once the bottom panel is removed, remove the front panel by unscrewing the top and bottom screws.

For dryers with lint filters located on top of the machine, the first step in disassembling is to remove the screws located alongside the lint filter slot. The next steps are to release the spring catches that are located under the top panel, then tilt the panel up to remove the front panel screws.

To prevent electric shock, it is important for individuals to ensure that the dryer is unplugged before attempting to disassemble, repair or troubleshoot the unit. It is also important to turn off the gas shutoff valve prior to working on a gas dryer.

Q&A Related to "How do you disassemble a Kenmore dryer?"
1. Unplug the Kenmore dryer from the wall outlet. If your unit is a gas model, shut off the gas valve as well. 2. Pull the Kenmore dryer away from the wall so that you have access
http://www.ehow.com/how_5489065_disassemble-kenmor...
Knowing how to disassemble a dryer is an important first step toward making repairs to this appliance. You'll have to open a specific panel, depending on what element of the dryer
http://www.life123.com/home-garden/home-appliances...
1. Unplug the dryer from the electrical outlet. 2. Locate the spring clips on the front panel of the dryer. They will be located about 3 inches from each side of the dryer. 3. Using
http://www.ehow.com/how_5779932_open-panel-kenmore...
1. Disconnect the power supply to the Kenmore dryer by unplugging it from the wall outlet. 2. Use a Phillips head screwdriver to remove the two screws that secure the front of the
http://www.ehow.com/how_5492028_remove-drum-roller...
1 Additional Answer
Ask.com Answer for: how to disassemble a kenmore dryer
How to Disassemble a Kenmore Dryer
To be able to test and replace parts on your Kenmore dryer, you must have access to them. By learning how to disassemble a Kenmore dryer, you can repair your unit quickly. The typical homeowner can disassemble the Kenmore dryer with basic tools in about... More »
Difficulty: Moderately Easy
Source: www.ehow.com
Explore this Topic
To disassemble the Maytag Neptune dryer you remove the door by undoing the door jamb screws. Then pull the front of the dryer panel off. After that you need to ...
There are a large number of Kenmore dryer repair manuals accessible from the official Kenmore website. You will have to provide certain information about the type ...
A how-to-guide for troubleshooting a Kenmore clothes dryer that has no heat would be a good resource to own. Since there are five reasons that a Kenmore dryer ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014 Ask.com