How to Make a Bow String?

Answer

Bowstrings are that string that is found on the archers bow. To make the it you will require string, string jig, serving material, bow square and bow wax. Depending on the e bow size you will require a string that will correspond with the size. The strands on the string should be able to carry the weight of the bow. Set up the bow rig it should be of the appropriate length.tie the string to the winding post until the correct amount strands are covered. then use the serving jig to sustain the tension of the jig and finally string the bow.
3 Additional Answers
Ask.com Answer for: how to make a bow string
How to Make Bow String
Simple bow strings are essentially braided cordage--the same process is used to make both rope and Flemish strings. The ability to braid a bow string is a valuable tool for the self-reliant archer, but it can also be used in any number of environments... More »
Difficulty: Moderate
Source: www.ehow.com
Take several strands of fine silk thread and braid them together tightly. Make sure you do not over tighten the string or it will bunch up in spots.
To make a bow string is fairly easy to do once you get a hang of it. You will want to choose the material you want to make the bow string out of. For more information look here: Guide To Making Bow Strings ;
Q&A Related to "How to Make a Bow String"
You can string a bow by looping the top loop over the nock, then attach the bottom loop. Use your leg to keep the bow string tight as you slide the string through the upper nock.
http://answers.ask.com/Sports/Other/how_to_string_...
1. Place the loops of the bow stringer lines into the top and bottom nocks of the bow. 2. Place your foot onto the surface of the bow stringer. Leave your foot here the entire time
http://www.ehow.com/how_5616178_replace-bow-string...
Get a good bow stringer,put the large loop of the string on the bow, use the bow stringer to put the loop on the other end of the bow,hold the bow stringer on the ground between your
http://www.ask.com/answers/107875181/how-to-string...
1 Place the bow into a compound bow press. Make sure the limbs are properly positioned. The purpose of the bow press is to hold the bow in place and to bend the limbs in the appropriate
http://www.wikihow.com/String-a-Compound-Bow
Explore this Topic
A bowstring jig is required in order to hand craft bowstrings from home.With a few minutes of spare time and some simple materials, you can craft a functional ...
1. Cut the 2-by-4 to 7 feet long and then use the measuring tape to measure and mark the center (lengthwise) of the board. Measure out from either side of the ...
1. Make a jig. Take a board that is several feet long and drive two nails into it. To determine the distance between the two nails, subtract 3 inches from the ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014 Ask.com