How to Make a Wooden Flute?

Answer

Choose a bamboo that is older, brown and not green. Cut it with a fine-toothed hacksaw to avoid cracking it. Make the blow hole by forming an opening at the end using the node. Heat up the drill with butane torch and as it is glowing hot, hold firmly on the marked hole and press it. Heat up your steel rod in the same way, but hold it with an oven mitt instead of pliers. When it is gleaming hot, feed it in through the open end of the bamboo until it hits the middle node. Burn all the way through the node as you reheat the rod until it is finished. Tune your flute by blowing transversely the blow hole until you get a clear and strong sound. If it is still off key, cut a small section. Mark your finger placements, heat it up and when it is glowing hot, burn the holes carefully and finish by sanding the flute lightly.
5 Additional Answers
Ask.com Answer for: how to make a wooden flute
How to Build a Wooden Flute
Flute music is enchanting. There's nothing like the pure tone made by a well-crafted wooden flute, and few things compare to the beauty of such an instrument. Making a flute from scratch is a time-consuming process and can take years to perfect, but if... More »
Difficulty: Moderately Challenging
Source: www.ehow.com
You can easily make a wooden flute out of a stem or quality apple-tree wood which has been seasoned for as long as possible (up to 17 years). These sticks are trimmed to the right length then bored up the middle to give the distinct middle blow-spine. Next, the stem is bored, laid out, reamed, socketted, profiled, milled, stamped, keyed and holed.
To make a wooden flute you will need the right kind of wood, bamboo works really good since it is tough and already hollow. You will need to drill holes into the top and make a mouth piece to blow air into. You can find more information here: jpdery.com
You can make a wooden float out of a bamboo shoot. You will need to close off one end of the bamboo shoot. You will need to make holes in one side of the bamboo shoot.
There are different ways to make wooden flutes. Some wooden flutes have keys and some do not. But both have a warm and mediative sound when played. Here are some simple instructions on how to make a wooden flute.
Q&A Related to "How to Make a Wooden Flute"
It takes a little work and a lot of patience, but you can do it. These come out beautiful and you can make music yourself. You can decorate it how you like.You can find more information
http://answers.ask.com/Entertainment/Music/how_to_...
1. Choose your wood. You can use many types of wood to make a flute-maple, African blackwood and cherry, to name a few. The denser the wood, the better sound you will get from your
http://www.ehow.com/how_4841142_build-wooden-flute...
A wooden flute.
http://wiki.answers.com/Q/What_is_a_wooden_flute_c...
Simple musical instruments such as the flute can create beautiful musical tunes with just a simple blow and the blocking of flute holes using the fingers. The flute will not be complete
http://www.howtodothings.com/hobbies/how-to-hollow...
Explore this Topic
To make a wooden flute you need the following; Put protective gear on, slip a pair of gloves on and fix protective eye gear over your eyes, secure your wooden ...
Learning to make a wooden flute is really very interesting there are many different ways to go about it. You can learn from a book, a person, or from a website ...
To make wooden flutes, you will need some very dense, fine wood. You will to need to cut the wood down to length and bore a hole right up the middle. You will ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014 Ask.com