How is battery acid made?


Batteries contain sulfuric acid. It is very dangerous, and can damage your clothes, skin and eyes. Always use care when handling sulfuric acid. The acid solution in a battery is 35% sulfuric acid and 65% water. If you are planning to make your own battery, remember to be safe and wear protective clothing. Have a sink or other water source nearby so you can rinse your clothes and yourself off should any acid get on you.
Q&A Related to "How is battery acid made?"
Battery acid can very simply be made by mixing sulfuric acid with the correct amount of distilled water. Be careful if you attempt this because the sulfuric acid will eat through
1. Put on protective gloves and eye wear before dealing with cleaning up the spilled acid. Battery acid is corrosive and can damage skin and eyes, and induce respiratory problems.
not that dangerous, but volatile enough to cause situations like this. make sure you clean the liquid thoroughly. Also use cotton earbuds to absorb the excess. Try not to make contact
1. Electrolyte solution be accessible in massiveness and must be of the correct specific gravity for the battery it being used in. There are assortments of electrolyte solutions with
Explore this Topic
Battery Acid spill clean up can be simple. First, identify the type of battery that spilled. You need to determine if it's an alkaline or acid battery. Acidic ...
Battery acid stains from concrete can be removed by; wear protective gloves, remove or sweep all dirt. Spray the area with chlorine bleach, scrub the area and ...
To treat a battery acid burn you need to remember it is a chemical burn. Chemical burns need to be rinsed with water as soon as possible. Keep flushing the burn ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014