How to Make Cat5 Connections?

Answer

In order to make CAT5 connections, use a crimping tool to expose the coloured cables in the CAT5 cable and insert them into RJ-45 leads. Next, using the same crimping tool, secure the cables into the RJ-45 leads and finally connect the devices with the cable.
Q&A Related to "How to Make Cat5 Connections?"
1. Push an RJ45 boot onto the end of the Cat 5 cable and slide it down about 12 inches. 2. Strip away about one inch of insulation from the end of the cable using the wire stripper.
http://www.ehow.com/how_7252275_connect-cat-5-fitt...
1. Connect the Cat-5E cable to the Internet port of the modem. The connector should click into place indicating that it has been securely connected. Plug the other end of the cable
http://www.ehow.com/how_7533025_connect-cat5e.html
1. Move the computer so that it is close enough to the DVR to be connected by an Ethernet cable. If the computer that you wish to connect is not portable, you will need to purchase
http://www.ehow.com/how_7194868_connect-dvr-cat-5-...
1. Find the shortest direct line between the two buildings with a laser measurer. Once the shortest line is found, spray paint the line across the ground. This will serve to guide
http://www.ehow.com/how_7609849_connect-two-buildi...
Explore this Topic
The main difference between a Cat5 cable and a Cat5e is the level of performance: a Cat5 is able to perform up to 100MHz while a Cat5e cable performs on connections ...
If you want to using your fax machine in your hotel room, one of the things that you will need is to make sure that you will not encounter 56 connectivity issues ...
To punch down blocks and jacks when wiring a cross-connect telephone; confirm that your CAT5 cable is not plugged in to a phone. Then use a wire stripper to cut ...
About -  Privacy -  AskEraser  -   -  Careers -  Ask Blog -  iPhone -  Android -  Help -  Feedback © 2013 Ask.com