How to Program a Rca Remote?


To programme an RCA remote, turn ON your device manually then press and 'HOLD' CODE SEARCH. Press and release the device button you want to set up (TV, VCR, and Cable Box) and release CODE SEARCH. Press OFF/ON repeatedly until the device turns off and once it does, press and release ENTER. If the device does not respond when you press any button, restart the process.
4 Additional Answers Answer for: how to program a rca remote
How to Program a RCA Remote
RCA's universal remote control is preprogrammed with code 000 for the "TV" button, the "VCR" button and the "Cable" button. The "AUX" button is programmed with code 037, which is for VCRs. First check to see if the preprogrammed codes work with the... More »
Difficulty: Easy
To program the universal RCA remote, gather the information like the make of the electronic. Once you get that refer to the paper provided with all the program numbers. If you do not have it then you can contact the company or search for the numbers online. When you get the number you would hit program, TV, the number and then program again. You will do this with all your electronics until they are all programmed.
To program a rca remote requires a code. If you have the manual for the remote, you can find the code for your TV or other device. You can also search for the code if you do not have the code. Follow the directions for code searching for your TV or device, if necessary.
To program a RCA universal remote you will need to have the information that comes with the remote that tells you the program numbers for your electronics. If you do not have them, you can contact RCA. Once you get the appropriate numbers, you would hit the key program, then TV then the numbers then program again. You would keep doing this for each of your electronics until all are programed.
Q&A Related to "How to Program a Rca Remote"
Turn on the device you would like to program. Press and hold the code search button til the light stays on. Press the button for the device you are programming the remote to operate
1. Turn on the device to be programmed. 2. Look up the code for your device on the RCA Universal Remote website. See the Resources section below. 3. Press and hold the "Code
A universal remote will come with codes needed to program the devices it can control. Generally, you click and hold the button that corresponds to the device you want to program and
1 These instructions come from the RCA website. The crucial step is to keep pressing the reverse button. Ad 2 Turn on the component (the tv, dvd, etc). 3 Press the TV (or DVD) button
Explore this Topic
Programming an rca remote hardly takes any brain power at all. Simply turn on the device that you want to program to your remote. Press and hold the code search ...
To program a RCA remote control, you will need the codes that match up devices. It's usually included with the remote. The code is 3 or 4 digits and it will connect ...
1. Install the necessary batteries into the RCA remote control. Most RCA remote controls require two AA batteries. 2. Turn on the device you want to control, using ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014