How to Program a Universal Garage Door Opener?

Answer

Programming a universal garage door opener is different for each brand, but the essential steps are all the same. Make sure you have the instructions that come with the universal remote. Follow them exactly.
Q&A Related to "How to Program a Universal Garage Door Opener?"
1. Enter your vehicle with your ignition key, and turn the key in the ignition to the "ACC" position. 2. Press and hold the two "Programming" buttons on your on-board
http://www.ehow.com/how_7766709_program-garage-doo...
Installing a garage door opener requires basic carpentry and electrical skills. While not very difficult, care must be taken to make sure all parts of the garage door opener are aligned
http://www.life123.com/home-garden/home-appliances...
That all depends on how your opener programs - if its smart button learning or dip switch. http://www.clickerdepot.com/help-faq . there is a good explanation there. You should also
http://wiki.answers.com/Q/How_do_you_program_a_uni...
1. Locate the garage door opener's emergency-release latch. It will be the red, 14-inch-long lanyard or cord with a red plastic handle on the end. It usually hangs from the tracks
http://www.ehow.com/how_6104775_open-garage-door-p...
1 Additional Answer
Ask.com Answer for: how to program a universal garage door opener
How to Set a Universal Garage Door Opener
Universal garage door openers are popular remotes used with a variety of garage door types. You can program these remotes directly to the motor to open the garage door, and they feature two or three buttons that you can set to open multiple doors. You... More »
Difficulty: Moderately Easy
Source: www.ehow.com
Explore this Topic
In order to program a Sears garage door remote opener, you need to first install the garage door opener. Next, you need to keep on clicking on the top left button ...
To program your Craftsman Remote Garage Door Opener, locate and press the 'smart' button. Usually this is located behind the lens or above the antenna wire. Press ...
In order to program a garage door opener on a 2000 Town and Country Fane you will need to use the key pad that is located under the seat in the front passenger ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014 Ask.com