How to read a manual weight scale?


There are 9 steps you should follow when reading a manual weight scale. These include removing your shoes, move the large weight block and the smallest weight block to your nearest weight. You should also adjust the two weight blocks until the pointer is centered or in the middle.
1 Additional Answer
To read a manual weight scale, you will need to step on the scale in the middle. You will then need to move the bottom one if needed. You will then slowly move the top one. The bottom represents hundred.
Q&A Related to "How to read a manual weight scale?"
1. Stand with your weight evenly distributed on the scale. You will notice that the numbers increase in a counter clockwise direction. There is a point of reference on the scale that
They have a spring attached to a dial or needle pointing at the weight on a gauge. Both spring and gauge are highly calibrated.
Stand with weight evenly distributed. There will be nine single units between
(a) 52 kg. (b) 52 kg. (c) Total acceleration overcome = g+ 0.39 g = 1.39g. So scale reads 1.39 x 52 = 72.28 kg. (d) Total acceleration overcome = g - 0.39 g = 0.61g. So scale reads
Explore this Topic
Most hospital scales now a days are set to read your weight in kilograms. Take the weight you see in kilograms and multiply that by 2.2 pounds and you will see ...
1. Determine the capacity of your scale. Scales are classified by the maximum amount they can weigh, and these specifications can be found in your owner's manual ...
To read a medical scale, you will need to first stand on the scale. Then, move the bottom weight away from the zero until it almost balances the bar. Then, move ...
About -  Privacy -  AskEraser  -  Careers -  Ask Blog -  Mobile -  Help -  Feedback © 2014