How do you remove decals from fiberglass?


Removing decals from fiberglass requires a hair dryer, a bottle of Windex or WD-40, a soft plastic spatula, rubbing alcohol and a non-abrasive cloth. One trick is to blow-dry the decal for three or four minutes with a hair dryer to soften the adhesive under the sticker and avoid damaging the fiberglass.

After blow drying, spray the sticker generously with Windex or WD-40. Let it soak for seven minutes or until it is saturated. If it is a paper decal, look for the softening of the paper, and if it is a vinyl decal, look for the liquids seeping out of the edges. After the decal has soaked for a while, use the non-abrasive cloth to wipe it off. The cloth does not get every trace of the decal off of the fiberglass. Use the plastic spatula to remove any leftover glue or adhesive left on the fiberglass. To avoid damaging the fiberglass, avoid pushing or scraping too hard. Soak the non-abrasive cloth in rubbing alcohol, and gently wipe down the area to help dissolve any leftover glue or adhesive residue. It may be necessary to repeat some of the steps, but be patient, and be careful not to use too much force.

Q&A Related to "How do you remove decals from fiberglass?"
1. Plug the hair dryer in and turn it on high heat. 2. Hold the hair dryer over the decal so that the decal warms up. This will soften the glue and enable you to peel the decal off.
There are products on the market that remove decals. A good one to buy is Sticker Shock. It can be purchased at Advance Auto Parts.
1. Sprinkle vinegar over a paper towel until the towel is soaked. 2. Wrap the paper towel tightly around the bicycle decal, and let sit for 10 minutes. 3. Remove the paper towel,
1. Gently brush over the top of the algae growing on the panel, using the soft-bristled brush. Use the brush to pull the roots free as well. 2. Pick up the algae with a paper towel
1 Additional Answer Answer for: how to remove decals from fiberglass
How to Remove Decals From Fiberglass
When you place a decal over a fiberglass surface, you notice the quick adhesion that is difficult to reverse. Scraping away the decal in an attempt to remove it can leave residue behind. By using the proper cleaning ingredients to remove the decals from... More »
Difficulty: Easy
Explore this Topic
Remove stains from a fiberglass laundry tub with a mild abrasive to restore its original appearance. Rust can dirty the laundry if not cleaned regularly. ...
To remove a paint from a fibreglass, apply the paint remover on a fibreglass surface and let it soften and become loose. However, do not let it stay long it can ...
To get rid of fiberglass itch, take a cold shower to remove any remaining fiberglass pieces. Then, take a hot shower with the heat turned up as high as possible. ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014