How to Replace a Toilet Flush Mechanism?

Answer

To replace a toilet flush mechanism, first turn off the water supply and disconnect the hose that runs from the tank. Using a wrench, unscrew the toilet flush mechanism and replace it with the new one. Fill in the valves, attach the washers and screw the new system in place. Finally attach the hose and turn the water supply back on.
Q&A Related to "How to Replace a Toilet Flush Mechanism"
1. Turn off the water supply for the Eljier toilet. The supply valve is located on the wall behind the toilet. Trace the water supply hose from the bottom of the tank to the wall
http://www.ehow.com/how_12053571_replace-flush-mec...
Buy a fluidmaster flush fixer complete kit. about 20.00 or so includes flush valve, flush flapper, tank bolts flush handle. Follow directions
http://www.fixya.com/support/t5387505-replace_flus...
Take tank off of the bowl and replace it . Always install new tank to bowl bolts. and washers and tank to bowl gasket. The flush valve is what your tank ball. is conected too. If
http://wiki.answers.com/Q/How_do_you_replace_toile...
First off, check that nothing is leaking. A leak can waste far more water than a larger flush. A leaky flapper usually results in the valve turning on intermittently, but you can
http://www.quora.com/How-can-you-make-a-toilet-flu...
Explore this Topic
If you don't have instructions to follow, the next best method for replacing a toilet flushing mechanism is known as the mirror approach. This means to replace ...
It is easy to replace a toilet flush pipe ring. Follow the following steps.1. Turn off the valve on the toilet flush and then empty the tank.2. Remove the base ...
A toilet that is hard to flush can be fixed by replacing the flash valve. This makes the toilets lever easy to activate. ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014 Ask.com