How do I unclog a washer drain?


The first step is loosening the cylinder with a pair of pliers to look at the hose or pipe. Shine the inside of the pipe with a light to find the clog and pour hot water to loosen the blockage. Remove the clog from the pipe and connect the hose to a water source to rinse out any debris. Reattach the hose as before.

The cylinder is typically located towards the back of the machine. Depending on the washer, there may be a few hoses, so choosing the correct one is essential. Turn counterclockwise to loosen the cylinder. A straight coat hanger should be long enough to reach the clog after pouring with hot water. When unclogging, keep wiggling until the blockage is loosened. When connecting the hose to a water source, the water should flow with ease if the blockage has been removed. If water is still being pushed out then the disruption remains. Keep trying to unclog the blockage and test as necessary. If using a chemical to clean the pipe, be sure to wait ten minutes before flushing out. Once the blockage has been removed, reattach the hose to the cylinder and turn clockwise. If there is still a problem, it could mean a sewer clog, in which case a professional needs to be contacted.

Q&A Related to "How do I unclog a washer drain?"
1. Grasp the pliers by the handle and place them over the metallic cylinder that connects the hose to the washer in the rear. This is normally found on the lower right-hand side of
Anyone who lives in a house or an apartment experiences a slow-draining or clogged drain from time to time. While this situation is annoying, it can usually be remedied without resorting
Try a snake to unclog your washer drain line. Another option would be a garden hose, turn it on, it should dislodge the clog.
1. Consider which method you'll try first. While each of the following methods can be followed in its own right, they have also been arranged so that if needed, you can follow each
1 Additional Answer Answer for: how to unclog washer drain
How to Unclog a Washer Drain
All of the water that is spun and drained out of your washing machine enters the sewage system through a drain hose. This drain hose can be as short as a few inches or as long as a couple of feet. Before working to unclog a drain hose, it is important to... More »
Difficulty: Moderate
Explore this Topic
You can use a pressure washer to push water through a French drain to unclog it. If that doesn't work, you can use a sewer snake to clean out the clogs. If neither ...
Whirlpool washers come with a product manual when purchased. This manual provides instructions on installation, use, care, and troubleshooting. For a lost manual ...
To drain a Maytag Neptune washer, first check the drain hose. If the hose is kinked, straighten it and the washer should drain easily. ...
About -  Privacy -  Careers -  Ask Blog -  Mobile -  Help -  Feedback  -  Sitemap  © 2014