Tweet
How to Setup a Linksys Wireless Router to a Cable Modem?
Answer
A Linksys wireless router can work with a cable modem if well set up. This can be done using instructions from the Linksys router set up guide. Plug Ethernet cable in its port on the modem and plug the other end of Ethernet's cable into the internet port of the Linksys wireless router. Plug an Ethernet's cable into one of the ports at the router's back and the other end to your computer. Plug in power cords and configure your router.
1 Additional Answer
To setup a Linksys wireless router to a cable modem one should follow these steps; Socket an Ethernet cable into the Ethernet port on the back of your modem. Pad the other end of the same Ethernet cable into the Linksys wireless router in the Internet port. Pass an Ethernet cable into the back of the router in one of the numbered ports. Power the other end of the same Ethernet cable into the back of your computer. Lump in the power cords of both your Linksys router and cable modem into power outlets.
Q&A Related to "How to Setup a Linksys Wireless Router to a..."
|
1. Insert the setup CD into your PC. Your PC must be within 5 feet of the router during the setup process. 2. Click "Next" at the User License Agreement screen. 3. Plug
http://www.ehow.com/how_6936478_setup-linksys-wire...
|
|
1. Connect an Ethernet cable between the Windows 98 computer and the Linksys router. 2. Open a Web browser. 3. Enter the IP address "192.168.1.1" without quotes into the
http://www.ehow.com/how_8046969_setup-wireless-rou...
|
|
1. Plug one end of the network patch cable into the network port on the computer. Plug the other end of the network patch cable into one of the network LAN ports on the Linksys router
http://www.ehow.com/how_8134026_setup-router-allow...
|
|
1. Plug an Ethernet cable into the Ethernet port on the back of your modem. 2. Plug the other end of the same Ethernet cable into the Linksys wireless router in the "Internet
http://www.ehow.com/how_6932712_setup-wireless-rou...
|
Similar Questions
People Also Asked
Wikipedia on Ask.com
A router is a device that forwards data packets between computer networks, creating an overlay internetwork. A router is connected to two or more data lines from different networks. When a...
Top Related Searches
Explore this Topic
To change the password on a Linksys router one needs to access the router's web-based setup page and click on the Administration tab. There one can enter the router ...
During installation of your router , you should be prompted to initiate the SES program and set a password to protect it. If not, newer versions of the routers ...
The very first thing you need to do is run the setup CD that came with the router . Don't plug anything in until the setup screen tells you to. Also depending on ...