Tweet
How to Make a Model Rocket?
Answer
Model rocket fins arise stability during fight; they are made of plastic material, therefore one can make a model rocket by creating a scale plans and design. Construct a chemical powered rocket capable of 1000 feet of powered flight with measured dimensions accordingly. Prepare a launch site and launch gantry after assembling the rocket, finally test it out.
Q&A Related to "How to Make a Model Rocket?"
|
Usually you would put the fins at the bottom of the body tube and evenly spaced around it. The rocket may be stable even though the fins were a little higher on the tube; it depends
http://wiki.answers.com/Q/Where_do_the_fins_go_on_...
|
|
They tend to slow it down, and if they are not perfectly parallel to the main tube. and. to each other, can make flight unstable. In fins, small is better.
http://wiki.answers.com/Q/What_are_the_effects_of_...
|
|
an elliptical fin works the best because it is stable, fast, and they cut through the air allowing it to go higher, faster and straighter.
http://wiki.answers.com/Q/What_fins_work_best_for_...
|
|
Almost any shape will work, although delta shaped is best. Far more important is that the fins should be exactly parallel to the main tube.
http://wiki.answers.com/Q/What_shape_of_fins_shoul...
|
Similar Questions
People Also Asked
Wikipedia on Ask.com
A model rocket, also known as low power rocket, is a small rocket designed to reach low altitudes (usually to around 100–500 m (300–1500 ft) for a 30 g (1 oz.) model) and Model rocket#Model rocket recovery methods...
Top Related Searches
Explore this Topic
Unless you have friends who own a wind tunnel, flying it is the only test. ...
The purpose of fins on a rocket is to help maintain stability when the rocket is in flight. The fins also help the rocket maintain its intended flight path and ...
To be able to glue fins on a bottle rocket bind the tape measure around the bottle and measure its circumference. Split the circumference by the number of fins ...